Powder Type Bio-Organic Fertilizer Production Line

1. Introduction for Bio-Organic Fertilizer Production Line

The organic fertilizer Granule production line project with an hour output of 5ton planned by our company is a process of producing organic fertilizer by granulating organic waste after microbial fermentation. It is a high-tech project with significant economic and environmental benefits. At the request of your company, this plan is specially formulated for reference.
 
2. Technical Process for Bio-Organic Fertilizer Production Line

The entire production line is mainly used to process materials (cow dung, sheep dung, pig dung, chicken dung, sludge, rice straw, corn straw) and other animal manure organic waste after fermentation and decomposing, which contains about 30%-35% moisture content. After crushing and sieving, the binder (bentonite, humic acid) and other ingredients that need to be proportioned are measured in the batching mixing system according to the proportioning requirements. (Adding functional bacteria can produce biological organic fertilizer, adding nitrogen and phosphorus , Potassium (the total nutrient content is less than 15%) can produce organic and inorganic fertilizer) dosing, mixing, the fully mixed material is uniformly and continuously fed into the granulator by the belt conveyor, and then rounded into spherical particles by the polishing and shaping machine. After drying at low temperature and high air volume by dryer (≤65ºC), it is cooled and sieved. The finished particles are conveyed to the finished product silo by belt, and are measured and packed into storage by the computerized quantitative packaging system.
 
3. Description for Bio-Organic Fertilizer Production Line

1. The equipment equipped with the system must be suitable for the smooth operation requirements of the assembly line and the following equipment technical requirements;
2. All motors adopt national standard copper wire;
3. The reducer adopts the national standard heavy duty;
4. The materials and equipment involved in this plan must be manufactured in accordance with the requirements of the national standard;
5. All configurations required in this technology are included in the total quotation;